NETGEAR WGT624v3 or WGT624SC Wireless Router Firmware 1.0.128_1.0.1 Download

New Features:--Adds WPA-PSK/WPA2-PSK mixed-mode support. I.e., router can now support one adapter using one, while another uses the other.

Bug Fixes:--Changing LAN IP from default settings to 10.0.0.1/255.0.0.0 used to cause router malfunction.--UPnP parser error caused router crash. The application Azureus asked to create 3 ports, but the format caused system crash while parsing the UPnP message.--SSID name previously left out repetitive space key value when the router boots. Example: "A B" (A space space B) would be stored as "A B" (A space B).--LAN scope used to work improperly. In "LAN IP Setup" page. If you changed the device IP to"192.168.0.1/255.255.0.0", and changed DHCP server range to "192.168.1.2 -192.168.1.254", it would not work.--Web console¡¯s password would not accept space characters.--Intermittently, after reseting and power cycling, the Web-based GUI wouldn't work.--RIP-2M did not get routing table.--Fixed that adding/removing user account caused router reboot and action failure.--When Connect as Required is enabled and the router is set to PPPOE or BigPond, it used to stay at connect status, even if the idle time elapsed.--When enabled DMZ feature, the WAN PC couldn't access the Apache HTTP server On the DMZ server.--WPA-PSK no longer fails in certain situations.--Regional wireless settings were updated.

NETGEAR WGT624v3 or WGT624SC Wireless Router Firmware 1.0.128_1.0.1