Linksys WRV200 Wireless-G VPN Router Firmware 1.0.24 Download

New Enhancements:--1. With remote management enabled, if a user makes three unsuccessful logon attempts, WRV200 will block the user\'s IP address for 180 seconds.--2. Add a configurable NTP Server in Setup->Time Setting.--3. Add a SNMP through IPSec Tunnel feature in VPN->IPSec VPN->Global Options.--4. Add two syslog messages, \"WRV200 system restart\" for system reboot and \"WRV200 start user-called FACTORY DEFAULT procedure\" for reset to factory default.

Issues Fixed:--1. Fixed the issue that IPSec tunnels cannot be established when the WAN connection type is PPPoE. This issue was found only on firmware 1.0.20.--2. Fixed the issue that router may unexpectedly reboot when all traffic is coming from/to wireless hosts and there is a VPN tunnel with steady traffic.--3. Stealth all ports on the firewall when DoS Prevention is enabled.--4. PPTP (WAN connection type) will not work when the PPTP Server IP and the Default Gateway are different in the configuration.--5. Fixed an issue that when PPTP is \"Connect on Demand\" and PPTP connection disconnects due to idle timeout, WRV200 does not try to re-establish the PPTP connection.--6. Improved the clock accuracy by synchronizing the time with NTP Server periodically.--7. Fixed an issue that the same DNS server was displayed in the Status->Router page with PPPoE WAN connection.

Known Issues:--1. If Syslog is enabled and the WAN connection is up, the Web UI may crash randomly.--2. IPSec tunnels do not pass NetBIOS Broadcast packets. This may create a problem when users want to search computers by names or to browse the network neighborhood on Windows Explorer. Users can use a LMHOSTS file to work around this issue. More information can be found at http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/cnet/cnfd_lmh_qxqq.mspx?mfr=true

Linksys WRV200 Wireless-G VPN Router Firmware 1.0.24