Pentax Optio S4i Firmware Update v1.01 Windows OS Download

Pentax Optio S4i Firmware Update v1.01 Windows OS.

Corrected a shutter lock-up problem in certain situations requiring a power reset.
When the camera is set to or used in Movie mode, then the Quick button is used to return the camera to Green mode, some Optio S4i cameras will experience a non-fatal shutter lock-up.
Data record speed in Night Scene mode improved from approximately 7 seconds to 3.5 seconds.
In Movie mode, optical zoom is possible before starting the recording. During the movie recording, only digital zoom will be possible. However, before the recording begins, you may optically zoom to the desired focal length.

NOTE: Near focus at wide angle and telephoto will be fixed at different points. When optically zoomed to telephoto before capturing a movie, be mindful that subjects close to the camera may be too close to be in perfect focus.

Please read BEFORE downloading firmware:
Before you update your camera's firmware, please do the following:

Check your current firmware version, to verify that your camera can be updated. To do this, hold down your camera's MENU button while turning the camera on. Your camera's LCD screen will display the current version of the firmware. Make sure the current version is 1.00.

Have a Pentax AC adapter (optional equipment) ready for use during the update, or make sure your battery is fresh and has a full charge.

NOTE: The update process will take approximately 30 seconds to 1 minute. If your camera runs out of power during the update process, the camera will become inoperable and will require repair. This repair will not be covered under warranty.

You can update your camera by using your camera's internal memory, or by using an SD card. In either case, make sure your memory is fully erased by using the FORMAT command in the camera's SET-UP menu.

- Turn your camera on, then press the MENU button.

- Use your 4-way controller to move over to your far right menu, which is the SET-UP menu (you should be able to press your right arrow twice to get to SET-UP).

- Use your 4-way controller to move down to the FORMAT option (press the down arrow once).

- Engage your FORMAT option by pressing the right arrow on your 4-way controller.

- Now, you will have the option to CANCEL or FORMAT, with CANCEL being the default option. Use your 4-way controller to select FORMAT (press the up arrow once).

- Press your OK button to complete the format.

Pentax Optio S4i Firmware Update v1.01 Windows OS